toggle menu

CHM Data Viewer - software

The CHM Data Viewer is a special visualization software with an easy to use interface. The software allows a representation of the data, which are measured with the Laserceilometer CHM 15k. The data is previously stored as raw data in NetCDF format and can be visualized and saved as an image file with the Data Viewer.
  • 8350.SW
Request a quote or advice
Brochure - Lufft - Cloud Height Detection (DE/EN)
Manual - Lufft - CHM Viewer (EN)
Manual - Lufft - CHM15k (EN)
Video - CHM15k: Applications with the Cloud Height Sensor CHM15k
Video - CHM15k: Technical Introduction of the Ceilometer CHM 15k

CHM15: On-site calibration & on-site check of the calibration How to do? How often to do?

Lufft is offering a cloud simulator tool to check the instrument quality in field.

The simulator generates different light pulses and background light levels to test the detection unit and the data acquistion path of our CHM units. The starting point is the laser itself. The laser pulse is detected by the simualtor and time shifted LED pulses are generated. By comparision with the instrument specific production protocol the user can easily see differences in the calibration. The simulator takes a test time of 30 minutes in maximum and should be repeated once per year to verify the status of the system.

In case the instrument is showing an error or the results of the simulator are out of specs, the LOM (laser optic module) of the CHM instrument shall be exchanged. It can be repaired and recalibrated in lab.

Furthermore, on-site calibration in field can be done to achieve absolute backscatter values from aerosol layers. The absolute calibration can be done in two different ways:

1) comparision with another lidar instrument, which should have a sensitivity 10 times better than the ceilometer and should have at least the same range resolution of 5m.

2) clear sky calibration and specific rain cloud calibration ( both methods will be implented by the European Met services shortly. There is an ongoing project to deliver the algorithms. Please check: 

Advantage: The Rayleigh calibration and the cloud calibration method do not need additional equipment.

The on-site calibration takes 24 h to 1 week to be able to compare different cloud and aerosol layer situations. In a rainy season, in permanent low cloud, brown cloud or in foggy places the on-site atmospheric calibration might not work at all and our cloud simulator check of the lab calibration gives you the best result.

CHM15k: In which applications is the ceilometer CHM15k in use?

The View into the Sky - Applications with the Cloud Height Sensor CHM15k! Watch our webinar recording where we present completely different application scenarios, where our cloud height sensor CHM15k can be the sensor of your choice!

To the webinar recording: Applications with CHM15k