toggle menu

Old container, new station: WS600 part of air quality measurement system in Kutaisi

An AQM station including a Lufft WS600 all-in-one weather sensor was installed by our local system integrator ELKO LLC in Kutaisi, Georgia in May 2017. It was mounted on an existing measurement container provided by the customer LEPL National Environmental Agency.

The system consists of a Fidas® 200 fine dust monitor and immission measurement system detecting PM2.5 and PM10 particles from Palay, Teledyne analysers and a Lufft WS600 on top. The components were delivered by company Envicontrol from Netherlands.

"I have to say that the whole system has been working really well" confirmed ELKO Project Manager Malkhaz Kapanadze.

Compact Weather Sensor WS600 with detection of temperature, relative humidity, air pressure, wind direction, wind speed, precipitation intensity, precipitation quantity

WS600-UMB Smart Weather Sensor

Compact all-in-one weather sensor with measurement of temperature, relative humidity, precipitation intensity, precipitation type, precipitation quantity, air pressure, wind direction and wind speed.

Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity, precipitation intensity, precipitation type, precipitation quantity, air pressure, wind direction and wind speed.

  • Temperature, relative humidity, precipitation intensity, precipitation type, precipitation quantity, air pressure, wind direction, wind speed
  • Ultrasonic/Wind, NTC/T, Capacitive/RH, MEMS capacitive/Pressure, 24 GHz Doppler radar/Precipitation
  • Compact all-in-one weather sensor, low power, heater, aspirated radiation shield, maintenance-free operation, open communication protocol
  • RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
Back to overview