toggle menu

Weather monitoring at German Landfills

According to the Landfill Regulation and Federal Emission Law in Germany it is mandatory on landfills to monitor weather data such as temperature, precipitation, evaporation, wind direction and speed. This is not only good for environmental protection purposes but also for the residents nearby. In this regard two new Lufft weather stations and one Lufft wind sensor were set up recently in Hamberg and Esslingen.

Weather data at Landfill Hamberg mbH

The Landfill Hamberg close to Maulbronn had searched for a new weather station model from May, 2013 on. They chose the Lufft WS302-UMB together with the Lambrecht rain sensor, which were installed in March 2014. The data are sent to a remote terminal unit (RTU) via SDI-12 protocol from Adcon and forwarded to an Adcon data center via GPRS. The results are visualized on the Adcon web interface addVANTAGE PRO as you can see in the attached screenshot.

The Landfill at Ramsklinge in Esslingen

Furthermore, the landfill at the Ramsklinge in Esslingen has replaced the OPUS20 data logger with the Lufft UMB technology in November 2013. There are now a WS200-UMB, a WS300-UMB and a rain sensor forming the perfect match to get all important data. Via MODBUS Protocol and by using a VPN gateway from the service provider pmTechnik, the sensor sends the data to the District Office in Esslingen. They use an individual solution for storing and analyzing the data, which is no problem thanks to the MODBUS Protocol.

Compact Weather Sensor WS302 with detection of radiation, temperature, relative humidity, air pressure

WS302-UMB Smart Weather Sensor

Compact all-in-one weather sensor for measurement of temperature, relative humidity, air pressure and radiation.

Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity, air pressure and radiation.

  • Temperature, relative humidity, air pressure, radiation
  • NTC/T, Capacitive/RH, MEMS capacitive/Pressure, Lufft Pyranometer/Radiation
  • Compact all-in-one weather sensor, low power, aspirated radiation shield, maintenance-free operation, open communication protocol
  • RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
Compact Weather Sensor WS300 with detection of temperature, relative humidity, air pressure

WS300-UMB Smart Weather Sensor

Compact all-in-one weather sensor for measurement of temperature, relative humidity and air pressure.

Compact all-in-one weather sensor from the WS-Series. Measurement of temperature, relative humidity and air pressure.

  • Temperature, relative humidity, air pressure
  • NTC/T, Capacitive/RH, MEMS capacitive/Pressure
  • Compact all-in-one weather sensor, low power, aspirated radiation shield, maintenance-free operation, open communication protocol
  • RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
Compact Weather Sensor WS200 with detection of wind direction, wind speed

WS200-UMB Smart Weather Sensor

Compact all-in-one weather sensor for measurement of wind direction and speed.

Compact all-in-one weather sensor from the WS-Series. Measurement of wind direction and speed.

  • Wind direction and speed
  • Ultrasonic/Wind
  • Wind detection with birdproof construction. Compact all-in-one weather sensor, low power, heater, maintenance-free operation, open communication protocol.
  • RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR and SDI-12
Back to overview